Error guide
Code overview
Quick answer — E1 on an Asko dryer is a thermistor error, meaning a temperature sensor failure. The manual says to call a service centre.
A thermistor error: the dryer reports a temperature sensor failure.
Model note: ASKO reuses codes across series and model years, so E1 (E1.1, E1.2, E1.3) may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: E1 (E1.1, E1.2, E1.3)
- Appliance: Dryer
An Asko dryer that shows E1 is reporting a thermistor error, which the manual describes as a temperature sensor failure. On the TD86 the same fault can read E1.1, E1.2 or E1.3.
Models covered
The entry applies to TD85.11XX and TD86 dryers, both current series.
What the manual tells you to do
- Read the error description: use the INFO button on the TD85.11XX, or press and hold OK on the TD86.
- Switch the dryer off and turn it back on.
- If E1 comes back, call a service centre. That is the manual’s instruction for this code.
Codes that look similar
- E0 is a control unit failure and also ends in a service call.
- E2 is a communication error on the same two series.
- E3 is a pump error for the condensate.
Asko dryer service in Los Angeles
For Asko dryer problems in Los Angeles, call (310) 651-7716 and mention the E1 code. Have the model number ready and tell us whether the dryer was switched off and on again. More about tumble dryer repair is on our site.
Source: ASKO Tumble Dryer TD85.11XX Instructions for Use; ASKO Tumble Dryer TD86 Instructions for Use
Safety first
Important safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
References
Sources & references
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing E1 (E1.1, E1.2, E1.3) — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.