Error guide
Code overview
Quick answer — E4 on the TD85.11XX (T411VD) comes with the message to clean the filters. If that does not help, call a service centre.
A control unit failure; the manual says to clean the filters or call service.
Model note: ASKO reuses codes across series and model years, so E4 may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: E4
- Appliance: Dryer
E4 is the one dryer error where the manual points you to the filters first. The display reads E4 with the message please clean filters or call service, and the manual labels the problem as control unit failure.
Which model
The entry is for the TD85.11XX (T411VD), a current Asko dryer.
What to do
Clean the filters, following the chapter Cleaning and Maintenance in your instructions for use. If E4 stays, call a service centre.
Related codes
- E3 is a condensate pump error.
- E6 is a relay failure, also a control unit problem.
- E7 is a door failure.
Asko dryer service in Los Angeles
After the filters are cleaned and E4 is still showing, call us in Los Angeles at (310) 651-7716. Share the model number and say the filters were cleaned. See tumble dryer repair for details.
Source: ASKO Tumble Dryer TD85.11XX Instructions for Use (T411VD)
Safety first
Important safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
References
Sources & references
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing E4 — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.