Error Code
ASKO Tumble Dryer E011 Error Code
E011 relates to a door-lock or control fault detected during operation.
Reviewed by Noah Calderon · Last reviewed September 7, 2026
Error guide
Code overview
Quick answer — E011 relates to a door-lock or control fault detected during operation.
The E011 code generally indicates the oven detected a problem with the door-lock mechanism or its control signal, often around self-clean or normal locking behavior.
Model note: ASKO reuses codes across series and model years, so E011 may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: E011
- Appliance: Tumble Dryer
- Content status: Needs Technical Review
What to look for
Symptoms you may notice
These are the signs homeowners often see when E011 appears on an ASKO appliance.
- Oven displays E011 and stops
- Door lock behaves unexpectedly
- Controls may be limited until cleared
Why it happens
Possible causes
Exact meaning can vary by model — treat these as common associations, not a final diagnosis.
-
A door-lock mechanism fault
-
A control-signal or wiring issue
-
A stuck lock after a self-clean cycle
Before you call
Safe checks you can make
Simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm nothing is physically obstructing the door
-
Allow the oven to fully cool if it was hot
-
Check that the door closes and aligns properly
Safety first
Important safety warning
Ovens operate at high voltage and high temperatures. Do not attempt internal electrical diagnostics — this must be handled by a qualified technician.
Please avoid
What not to attempt
Get help
When to call a technician
If E011 persists after the oven cools and the door is unobstructed, book a diagnosis to inspect the lock and control safely.
Models
Related models
References
Sources & references
- Appliance user manual — display messages section
FAQ
Frequently asked questions
Quick answers about E011, safe checks, and when to book a technician.
02 answers
Sometimes the lock sticks after a high-heat cycle. If it does not clear after cooling, it needs a diagnosis.
It is best to stop until the lock/control fault is resolved.
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing E011 — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.